Table E Gasket (Full Face) The gasket retainer extends out to the O.D. of the flange. Holes are cut at the bolt circle to accommodate threaded studs and sleeves.

Table F Gasket(Ring Type) The gasket retainer extends out to the I.D. of the bolt circle. The threaded studs and sleeves centre the gasket in the flange.

All standard pipe gaskets can be made from a range of materials such as rubbers, corks and non-asbestos fibres. The gasket material used will depend upon the application. For instance the internal conditions – what is in the pipeline (and so the temperature, pressure and chemical resistance required) and the external environment of the pipe (air temperature, presence of chemicals etc.). If you need help specifying the material for your application then please contact us for technical advice.

Manufacture

Pipe gaskets are manufactured by using a tool to press-cut the material. RAM holds dedicated tooling for the majority of standard pipe gaskets sizes. For the larger sizes, gaskets are produced in segments on an electronic cutting table and then joined together.

Lead Time

Our standard lead time is 7-10 working days. However, small quantities can occasionally be produced for delivery next working day. Please contact us if you have an urgent requirement.

Price

Prices for standard pipe gaskets depend upon volume and material specifications.