SYNTHETIC RUBBER’s piston seal with a small cross-section design, which can be fitted into an integral groove with low sliding resistance. The material used is nitrile butadiene rubber with good cold resistance, and special low-temperature oils can be used. Hydrogenated butadiene rubber with good heat resistance and wear resistance Nitrile rubber.

Features:

(1) High and low temperature resistance;

(2) Ozone resistance;

(3) UV resistance;

(4) Durable performance;

(5) Waterproof, anti-toxic, good elongation, good air-permeable; (6)Resistance to oil, weather, abrasion, solvent.

Seal Spec:

According to whether the seal is in contact with its relative moving parts, it can be divided into contact seal and non-contact seal; according to the seal and contact position, it can be divided into circumferential seal and end face seal. End face seal is also called mechanical seal. The centrifugal seal and spiral seal in the dynamic seal are sealed by powering the medium when the machine is running, so they are sometimes called dynamic seals.