MH Rubber Coil
Category
-
Rubber Sheeting
- Anti Fatigue Rubber Mat
- Check Plate Rubber Mat
- Electrical Insulation Rubber Mats
- EPDM Sheet
- ESD Anti Static Rubber Mats
- Fined Ribbed Rubber Mat
- Latex Sheet | Natural Rubber Sheet
- NBR Sheet
- Neoprene Sheet
- Neoprene Sheet c/w fabric insertion
- Round Stud Rubber Mat
- Rubber Sheet with Fabric Surface | SBR Sheet
- Silicone Rubber Sheet
- Willow Mat | Diamond Plate Rubber Mat
- Rubber Gasket
- Rubber Flexible Joint
- Rubber Fender
- Road Safety Rubber Products
- PVC Curtain Strips
- Anti-vibration Pad
- EPDM Sponge
-
Extrusion
- Custom Made Rubber Extrusion聽
- Edge Trim Door Seal | Self-Gripping Door Seal
- L Shaped Door Packing
- NBR Rubber Cord
- Rubber Container Door Seal Extrusions ( J Shaped)
- Rubber Gate Seal Extrusions
- Rubber Hatch Door Seals
- Rubber P Profile Extrusions
- Rubber Right Angle L Extrusion
- Rubber T Profile Extrusions
- Rubber Tadpole Extrusions
- Rubber Tank Strap Extrusions
- Rubber Wedges Profile Extrusions
- Rubber Weigh Bridge Seal Extrusions
- Square Solid Rubber Strip
- Fastener
-
Molded Products
- Polyurethane Sheets
- PTFE Sheet & Gasket
- PVC Sheet
SYNTHETIC RUBBER PRODUCT’s MH coupling consists of two flanges and flexible ring able to compensate all types of shaft misalignments.The flexible rings are made of synthetic rubber with steel cores reinforced for improve reliability and maximum operating speed of the coupling. The damping characteristic of the rubber enable to absorb and dampen torsional vibrations, operate effectively in temperature range of -40 to +100 °C. The rubber also resists to oil, dirt, grease, moisture, ozone and many chemical solvents.
Remarks:
- Accommodate shaft misalignments, parallel offset 0.2 mm. and angular 0.3°.
- Splined, hex, round, set screw or keyway bore available at additional charge.
- Coupling hub material is made of cast iron.
- Find Rated Torque by :
- Rated Torque (Nm.) = (9.55 x P x S.F.) / N
- Where P = Drive rated power (kW), N = Speed (rev./min)
- Select coupling with the same or higher Torque.
- Check hub bore capacity.
- Check allowable speed.
Available Size:
MH 55, MH 65, MH 80, MH 90, MH 115, MH 130, MH 145, MH 175, MH 200